The Nespresso coffee machine It can be our best ally day after day, since it is the easiest way to have a coffee in the morning quickly and effectively. But how any technology can have many mistakes, that's why in this article you will find the most common errors and the faster and more effective solutions.
What to do if my Nespresso doesn't come out with water?
There is a very common problem in coffee machines Nespresso, especially if you haven't used it for a long time or if it's new, and when you press the button no water comes out but you can hear the pump hum and the interior engine.
This could be due to several things, but we will check the simplest ones first. As if there is water in the tank, either if it is placed correctly on its base.
If everything is in order, then the internal water pump It will probably be blocked by air. If the water pump has air instead of water, it cannot make water flow through the system, and therefore water cannot flow out. The solution?
- Lift the top lever of your Nespresso vertically.
- Press the Lungo or Espresso button once. You will hear the motor or pump in the machine hum and start.
- Push the top lever back a little further, it will go about a few centimeters past vertical.
- After a second, you will hear and see water start to flow through the Nespresso.
- Close the top lever back to its normal horizontal position.
With this we would have the problem solved. So that it doesn't happen again We must always pay attention before making the coffee that the Nespresso water tank is full.
What to do if a capsule gets stuck?
Another of the most common failures in Nespresso machines is that a capsule or the capsule holder He doesn't want to go out. Don't worry, you won't have to buy a new one, yes, don't try anything with brute force because we can be left with an irreparable piece in our hand.
Before starting we have to be clear about two things, if what has happened is that a capsule is inside After a long time, our Nespresso is not stuck, it simply has the needle still injected into the capsule.
The simplest solution in these cases is to prepare the coffee maker as if we were going to prepare morning coffee. We let the water flows through the needle and through the capsule and in this way we will achieve facilitate needle movement.
You may be interested in this article about how to recover data from a damaged SD or microSD card
These are the two most common problems and they have an easy solution so we won't have to take our Nespresso to the technician.
